PROLIME
Natural lime based naturally matt paint
PROLIME is a natural mineral paint made in harmony with nature, using only limestone, clay and natural pigments. It is suitable for all unsealed interior and exterior masonry surfaces, such as render, brick or stone. It can also be used on correctly prepared plaster, sealed plasterboard or previously painted interior walls.
🌿 100% NATURAL ECO-PRODUCT
PROLIME is completely free from:
VOCs (Volatile Organic Compounds) – contains less than 0.05 g/l
Biocides, formaldehyde and fungicides
PFAS "forever chemicals"
Artificial nano particles
Heavy metals (such as cadmium)
Solvents
💚 BREATHABLE AND HEALTH-FRIENDLY
PROLIME has A+ indoor air quality classification – non-toxic, no fumes. It is safe for people with allergies or chemical sensitivity (MCS/CIRS syndrome). The paint has natural antibacterial properties and does not attract dust as it has no electro-static charge.
🏛️ SUSTAINABLE AND DURABLE
Water vapor permeable – does not trap moisture in walls, will not blister or peel
100% UV stable – does not fade in sunlight
Reduces surface stress due to heat-reducing micro crystals
Strengthens and protects masonry surfaces by maintaining alkaline levels
Protects against weather and pollutants
The product is manufactured in Northern Europe and complies with the highest European Union environmental standards.
IMPORTANT!
⚠️ Before applying PROLIME, ensure the surface is firm, clean, sufficiently aged and dry. Wash and remove old paint with poor adhesion.
⚠️ If there is mold on the surface, it must be professionally treated before painting.
⚠️ Use PROLIME only when the temperature is between +10°C and +35°C and air humidity is less than 75%.
⚠️ Avoid applying the product in direct sunlight.
⚠️ After application, exterior surfaces must be protected from rain and moisture until the product is completely dry (usually at +20°C after approximately 72 hours).
⚠️ Complete curing takes about two weeks, slowly absorbing CO2 from the air.
⚠️ No additional protective coating needed! PROLIME does not form a layer on top of the surface but penetrates into the pores and forms crystals, creating both a decorative and protective finish.
Application
Suitable for modern and traditional projects:
Lime or cement rendered walls (new and old)
Plaster, plasterboard, ceilings
Brickwork
Most natural stones
Adobe blocks
Earth buildings
Cement blocks
Historic buildings
Straw-bale constructions
Especially recommended for:
People with allergies or chemical sensitivity
Eco-friendly construction projects
Historic building restoration
Bedrooms and children's rooms
Not suitable:
On oil or glue putty surfaces
On surfaces previously treated with silicone impregnations
On non-absorbent surfaces
On damp or frost-damaged surfaces
Key Features
🌱 100% NATURAL ECO-PRODUCT: Only limestone, clay and natural pigments – no chemicals!
🏆 A+ indoor air quality classification: Non-toxic, no fumes, VOC-free (< 0.05 g/l).
💧 Breathable and permeable: Does not trap moisture in walls, will not blister or peel.
☀️ UV stable: 100% resistant to UV radiation – does not fade.
🛡️ Natural antibacterial properties: Safe for allergy sufferers.
🚫 No electro-static charge: Does not attract dust.
🌍 Environmentally friendly: Water-based, easy to clean up, does not pollute waterways.
⛔ Free from harmful chemicals: Contains no biocides, formaldehyde, fungicides, PFAS, artificial nano particles, or heavy metals.
🛑 No protective coating needed: Self-protecting, breathable mineral finish.
Technical Data
